FR-01 is a pressure sensitive adhesive specially used for low viscosity protective film formed by lotion polymerization using special energy monomer and acrylate monomer as the main raw materials. It has the characteristics of low cost, high solid content of glue solution, and is an ideal environment-friendly product.

1、 Physical performance

appearance

milky liquid

Solid content (%)

50±1

PH value

7 ± 0.5

Viscosity (mpa. s)

60~80 

Peel force range (Newton/inch)

0.1 ~ 0.3

2、 Characteristics of adhesive liquid

1. FR-01 pressure-sensitive adhesive is a two-component product that needs to be used in conjunction with aziridine curing agent. Different formulation ratios will result in different adhesive protective tapes.

2. Good aging resistance (including high and low temperature resistance, high humidity resistance), and good UV resistance.

3. It is recommended to use PET, PE, and OPP substrates as protective films.

4. Suitable for organic glass, high-performance resin board, mirror stainless steel, sprayed aluminum plate, etc.

3、 Preparation and precautions of adhesive solution

1. Preparation:

In the case of mechanically stirring FR-01, slowly add a quantitative curing agent that has been diluted with an appropriate amount of water. After adding the curing agent, ensure to stir for 5 minutes to evenly disperse it in the adhesive solution, and filter it with a 200 mesh filter.

2. Precautions

① The safe use period of the adhesive solution for preparing curing agents generally does not exceed 6 hours.

② The product should avoid freezing and exposure to sunlight, with storage conditions of 5-35 ° C and an effective storage period of 6 months.