FR-06 is a water-based acrylic pressure-sensitive adhesive used for medium to high viscosity protective films. In addition to the excellent performance of solvent based pressure-sensitive adhesives, it also has the characteristics of low cost and high solid content in the adhesive solution, making it an ideal environmentally friendly product.

1、 Physical performance

appearance

milky liquid

Solid content (%)

50±1

PH value

7 ± 0.5

Viscosity (mpa. s)

40 ~ 80

Peel force range (Newton/inch)

3 ~ 8

2、 Characteristics of adhesive liquid

1. FR-06 pressure-sensitive adhesive is a two-component product that should be used in conjunction with aziridine curing agent. Different formulation ratios will result in different adhesive protective tapes.

2. Good aging resistance (including high and low temperature resistance, high humidity resistance); Good UV resistance.

3. Suitable for making adhesive tapes from paper, film, or composite substrates.

4. Suitable for spraying profiles, etc.

3、 Preparation and precautions of adhesive solution

1. Preparation:

In the case of mechanically stirring FR-06, slowly add a quantitative curing agent that has been diluted with an appropriate amount of water. After adding the curing agent, ensure to stir for 5 minutes to evenly disperse it in the adhesive solution, and filter it with a 200 mesh filter.

2. Precautions

① The safe use period of the adhesive solution for preparing curing agents generally does not exceed 6 hours.

② The product should avoid freezing and exposure to sunlight, with storage conditions of 5-35 ° C and an effective storage period of 6 months.