1、 Product name: acrylate lotion composite adhesive.

2、 Product Features:

1. Single component propylene latex with good environmental friendliness.

2. Good transparency, high peel strength, short curing time, and good economy.

3. Suitable for composite of various substrates (such as BOPP, CPP, PET, PE, etc.), including water-based and oil-based inks. Coating amount of 1.0-3.0g/m2 (dry adhesive), composite drying temperature of 85-95 ° C.

4. The BOPP//μ mPET compounded with FR-201 and the similar products compounded with polyurethane glue passed the 30 day test in the LUV-2 ultraviolet accelerated aging test box and the 180 day outdoor natural light test. The aging performance of the composite product using FR-201 acrylate lotion composite binder is significantly better than that of the similar products compounded with polyurethane.

3、 Main purpose:

Composite bonding of plastic film, aluminum plated film, and printed film for lightweight packaging.

4、 Technical indicators:

1. Color: Milky white liquid (transparent after drying).

2. Solid content: 43% ± 2%

3. PH value: 6.5~7.5

4. Viscosity: 15~50 (mpa. s)

5、 Instructions for use:

1. When using this composite adhesive, there is generally no need to add water or curing agent. If dilution is required, an appropriate amount of deionized water can be used. The composite adhesive has been filtered through a 200 mesh filter.

2. This product requires a surface tension value of>38 dyn/cm2 for polyolefin film and>45 dyn/cm2 for polyester film on composite substrate. The aluminum plated base film requires good adhesion between the aluminum layer and the substrate without detachment.

The wire coating roller commonly uses laser or electronic engraving rollers with 180-200 lines, and the wire opening is relatively large.